Smart Curtain Robot
1.Regarding Power-On
Open the battery cover and remove the insulating tab. The device is successfully powered on when the indicator light turns on.
2.Direction Reversal Confirmation
Verify that the product’s operating direction matches the curtain’s opening and closing direction. If the direction is reversed, press and hold the Settings button until the green indicator light flashes, then press the Down button on the remote control to reverse the direction.
3.Important Notes for Track Installation
Before installation, close the curtains. Install the appropriate pulley for your track type and attach the robot’s hook to the pulley. Turn the knob clockwise until the upper roller touches the bottom of the track, then turn it two more times to ensure the roller is firmly pressed against the track.
4.Wrong mode selected: Please press and hold the setting button. The blue light will flash first, then the green light will flash.
The green light is for remote control pairing, and the blue light is for connecting to a phone via Bluetooth.
If the light flashing mode is operated incorrectly, please remove and reinstall the battery or reset it.
5.Before setting the travel, first verify that the product's operating direction matches the curtain opening and closing direction.
Note: For double curtains, the robot with a wheel that turns to the left should be installed on the right side of the curtain.
6.The remote control does not respond when a button is pressed.
Check the battery level; make sure the remote control has been paired successfully.
